Rope Access Inspection Services

Integritatea structurilor metalice

Asset Integrity Inspections

All inspection services are being performed by IRATA qualified technicians with the main purpose  of identifying flaws caused by corrosion or other types of deterioration processes, which are  exerted on the surface and inside the metal structure or which are generated by the lack of bolts,  washers or any other essential structure composing elements
In urma inspectiilor va fi intocmit un raport detaliat care va cuprinde informatii referitoare la starea structurilor metalice, imagini reprezentative si recomandari cu privire la solutionarea problemelor tehnice.

Our Rope Access Inspection Services are applicable to:

Railway, arch, beam and suspension bridges

Centrale energetice

Industrial buildings: industrial halls, power plants, wind farms, wind  turbines, drilling rigs, etc.

Cladiri pentru comert sau transporturi

Civil construction environments, trade and transport assets

Instalare echipamente industriale

Drilling Structures Inspections

 

We perform regular inspections on drilling rigs.  Kreativ Alpin rope access technicians are qualified  to operate III and IV category inspections on drilling structures, all procedures being carried out in  accordance  with API 4G best practices.

 

The visual inspection includes checking and testing procedures for all the component elements of the  drilling installation: tower, ramp rods, drilling and  traction cables, tanks, wind turbine blades, shaft, bolts, shields, pipe hangers and clamps, etc.

Being one of the most appreciated companies in Romania for its expertise in offering rope access services, Kreative Alpin can  provide you with level 1,2 and 3 IRATA qualified technicians who are specialized in performing visual inspections in hard to reach  spaces, in accordance with all ICOP safety regulations.

level 1, 2 and 3  IRATA qualified  technicians

NDT Inspections

Kreativ Alpin is one of the main rope access service providers of non-destructive inspections any types of assets in industrial areas.

ECT

(Eddy Current Testing)

Changes in the magnetic field generated by eddy currents, due to discontinuities of the inspected material and taken over by the appropriate equipment allow us to highlight flaws in the structure of the verified element. The testing process depends on the measurement, the frequency, the electrical and magnetic properties, as well as on the dimensions of the targeted surface.

MPI

(Magnetic Particle Inspection)

Magnetic particle testing is used to check if the inspected structures have surfaced-breaking defects or even cracks deep inside the material. This type of inspection is recommended for ferromagnetic materials, cast iron or steel (permeability or magnetic conductivity µ> 100).

Eddy Current Testing

DPI

(Dye Penetrant Inspection)

DPI inspection is based on capillary effect, through which a liquid substance is absorbed by a porous material or it infiltrates into cracks on its surface. Unlike other examination methods, IPR inspection can be performed on a wide variety of metal, plastic, concrete, glass or ceramic surfaces.

PAUT

(Ultrasonic Testing)

Ultrasonic inspection consists of checking the surfaces by means of high-frequency sound waves that can outline the surface, subsurface, internal and dimensional flows. The signals emitted by sound waves are transformed into electrical impulses which determine the type of flaws, their depth and size.

Eddy Current Testing

The inspections are performed by IRATA certified technicians,

who have extensive experience in establishing the types of tests and verifications that must be performed, depending on the needs or data obtained in collaboration with specialists, such as structural engineers.

Inspectie bolturi, tensionare, schimbare

Bolt Inspection and changeout

 

Inspection of the bolts is a procedure that must be performed regularly, once in a few months or annually, depending on the type of metal structure to be verified. Loose or damaged bolts need to be removed and replaced as they can endanger the integrity of the entire metal structure.

 

Kreative Alpin can provide you with IRATA certified technicians who will perform the visual inspection and elaborate a report on which the parts that could endanger the target structure will be assembled or replaced.

DROPS Inspections

 

Kreativ Alpin is a member of DROPS, its main objective being to ensure the most effective practices for preventing accidents through which falling objects could damage assets or equipment.

 

Our team consists of rope access technicians authorized to perform DROPS inspections and risk analysis procedures and also certified for issuing reports regarding the diagnosed flaws.

Inspectii DROPS
Inspectii EIP

PPE Inspection

 

Kreativ Alpin technicians are qualified to regularly perform PPE inspections, which aim to check safety equipment designed to protect the user against work-related hazards that may result in injury or fatality. All the procedures are being performed in accordance with the CSN EN 365 regulations.

 

After examining the equipment and checking its series, our technician will issue a report, providing accurate details on the possibility of reusing the equipment in conditions of maximum safety: hats, earmuffs, gloves harnesses, ropes, fastening gear and other devices used to work at height in the industrial sector.

Rope Access Inspection Services

Integritatea structurilor metalice

Integritatea structurilor metalice

All inspection services are being performed by IRATA qualified technicians with the main purpose of identifying flaws caused  by corrosion or other types of deterioration processes, which are exerted on the  surface and inside the metal structure or which are generated by the lack of bolts, washers or any other essential structure composing elements.

Following the inspections, a detailed report will be prepared which will include information on the condition of the metal structures, representative images and recommendations regarding the solution of the technical problems.

Our Rope Access Inspection Services are applicable to:

Railway, arch, beam and suspension bridges

Centrale energetice

Industrial buildings: industrial halls,  power plants, wind farms, wind  turbines, drilling rigs, etc.

Cladiri pentru comert sau transporturi

Civil construction environments,  trade and transport assets

Instalare echipamente industriale

Drilling Structures Inspections

 

We perform regular inspections on drilling rigs. Kreativ Alpin rope access technicians are qualified to operate III and IV category inspections on drilling structures, all procedures being carried out in accordance with API 4G best practices.

The visual inspection includes checking and testing procedures for all the component elements of the drilling installation: tower, ramp rods, drilling and traction cables, tanks, wind turbine blades, shaft, bolts, shields, pipe hangers and clamps, etc.

Being one of the most appreciated companies  in Romania for its expertise in offering rope  access services, Kreative Alpin can  provide you with level 1,2 and 3 IRATA qualified technicians who are specialized in performing  visual inspections in hard to reach  spaces, in accordance with all ICOP safety  regulations.

level 1, 2 and 3  IRATA qualified  technicians

NDT Inspections

Kreativ Alpin is one of the main rope access service providers of non-destructive inspections any types of assets in industrial areas.

ECT

(Eddy Current Testing)

Changes in the magnetic field generated by eddy currents, due to discontinuities of the inspected material and taken over by the appropriate equipment allow us to highlight flaws in the structure of the verified element. The testing process depends on the measurement, the frequency, the electrical and magnetic properties, as well as on the dimensions of the targeted surface.

Eddy Current Testing

MPI

(Magnetic Particle Inspection)

Testarea cu particule magnetice este utilizată pentru a verifica daca structurile prezinta fisuri pe suprafata sau chiar si in interior. Acest tip de inspectie este recomandat pentru materiale feromagnetice, fontă sau oțel (permeabilitate sau conductivitate magnetică µ> 100).

DPI

(Dye Penetrant Inspection)

DPI inspection is based on capillary effect, fthrough which a liquid substance is absorbed by a porous material or it infiltrates into cracks on its surface. Unlike other examination methods, IPR inspection can be performed on a wide variety of metal, plastic, concrete, glass of ceramic surfaces.

Eddy Current Testing

PAUT

(Ultrasonic Testing)

Ultrasonic inspection consists of checking the surfaces by means of high frequency sound waves that can outline the surface, subsurface, internal and dimensional flows. The signals emitted by sound waves are transformed into electrical impulses which determine the type of flaws, their depth and size.

The inspections are performed by IRATA certified technicians,

who have extensive experience in establishing the types of tests and verifications that must be performed, depending on the needs or data obtained in collaboration with specialists, such as structural engineers

Inspectie bolturi, tensionare, schimbare

Bolt Inspection and changeout

 

Inspection of the bolts is a procedure that must be performed regularly, once in a few months or annually, depending on the type of metal structure to be verified. Loose or damaged bolts need to be removed and replaced as they can endanger the integrity of the entire metal structure.

Kreative Alpin can provide you with IRATA certified technicians who will perform the visual inspection and elaborate a report on which the parts that could endanger the target structure will be assembled or replaced.

Inspectii DROPS

DROPS Inspections

 

Kreativ Alpin is a member of DROPS, its main objective being to ensure the most effective practices for preventing accidents through which falling objects could damage assets or equipment.

Our team consists of rope access technicians authorized to perform DROPS inspections and risk analysis procedures and also certified for issuing reports regarding the diagnosed flaws.

Inspectii EIP

PPE Inspections

 

Kreativ Alpin technicians are qualified to regularly perform PPE inspections, which aim to check safety equipment designed to protect the user against work-related hazards that may result in injury or fatality. All the procedures are being performed in accordance with the CSN EN 365 regulations.

  After examining the equipment and checking its series, our technician will issue a report, providing accurate details on the possibility of reusing the equipment in conditions of maximum safety: hats, earmuffs, gloves harnesses, ropes, fastening gear and other devices used to work at height in the industrial sector.

error: Content is protected !!
Open chat
1
Salut!
Cu ce te putem ajuta?
Call Now Button